Puzzled by a technical word? Bamboozled by building terms?
Then check out the meaning in this Rightsurvey glossary.
A perforated brick or metal/plastic grille used for ventilation, typically in external walls to suspended timber ground floor voids.
A moveable scaffolding platform allowing access for high level work on roofs etc.
Gravel, shingle or pebbles etc used in the manufacture of concrete.
A metal strip, usually of lead, fitted at the base of a chimney or under window sills above tile-hung bays, to provide a waterproof joint.
Moulded wood strip covering the joint at the edge of a door or window frame and the surrounding wall.
Cement with 10 –15% asbestos fibre as reinforcement. Hazardous fibres may be released if cut or drilled.
Finely dressed natural stone, a superior grade of masonry.
Black tar-like substance used as an adhesive and impervious moisture barrier on flat roofs and floors.
A metal flashing strip forming a waterproof seal between the back of a stack and its roof slope.
Metal vent that allows gas appliances both to draw air in from outside and to expel exhaust fumes. Some are fan assisted.
Vertical spindles supporting the handrail of a staircase.
A row of balusters / spindles joined to a horizontal rail, typically to a staircase or landing.
Boards placed along the verges of a roof , usually at gable ends, often of decorative timber. AKA ‘vergeboard’.
Thin lengths of timber to which tiles or slates are nailed or fixed.
Larvae of various species of beetle which tunnel into wood causing damage, usually evident as small boreholes. The generic term is ‘woodworm’.
Smooth layer of concrete alongside the drainage channel in an inspection chamber. AKA ‘haunching’.
Black, sticky substance related to asphalt. Used in sealants, mineral felts and DPC’s
The pattern in which bricks are laid in mortar to form a wall.
Commonly used term for various types of concrete building blocks, originally made from cinders (‘breeze’).
A brick or stone support to a wall designed to resist thrust movement and to give added stability.
A window hinged at one edge and designed to open inwards or outwards.
Standard modern (post 1930) main wall construction comprising two leaves of brick or blockwork about 280mm thick, separated by a gap (cavity) of about 50mm which can be insulated. The leaves are secured together with wall ties.
The covering over a junction (eg between roof s and walls) made from mortar instead of a metal flashing.
CESSPIT or CESSPOOL
An underground tank to hold sewage and foul waste, needing regular emptying.
That part of the chimney flue that projects into a room. The ‘stack’ is the part above roof level.
A water storage tank (usually to a WC or water tank in loft)
A horizontal timber member that joins and restrains opposing roof slopes.
Modern ‘sealed system’ gas boiler which activates on demand for hot water or central heating and does not require water tanks or cylinders, being supplied direct from the mains.
Masonry covering laid on top of a wall, to stop rain soaking into the wall, usually of stone or concrete.
Projection of brick, stone, timber or metal jutting out from a wall to support a load such as a beam.
CORNICE and COVING
Ornamental plaster around the joint of a wall and ceiling. Coving is a curved strip covering the joint of a wall and ceiling.
A cap to a chimney or vent pipe.
Protective wooden or tiled horizontal strip running along internal walls, about 1m above the floor.
DAMP PROOF COURSE (DPC)
An impervious layer (eg slate, felt, PVC) built into a wall to prevent the passage of dampness.
DAMP PROOF MEMBRANE (DPM)
An impervious layer (polythene sheeting, bitumen etc) within a concrete ground floor slab to prevent rising damp.
A window which projects out from a roof slope.
Thin timber plugs that hold jointed sections of timber together.
The overhanging edge of a roof near the gutter.
Tiles moulded from one clay, usually red, inlaid with white or coloured clay patterns, fusing when fired (as opposed to plain quarry tiles). Used mainly for floors.
The slope or gradient, typically of a pipe run or flat roof, to ensure water run off.
A small window above a door or casement.
Horizontal timber boards that run along the eaves at the base of roof slopes. They often cover the ends of the rafters. Gutters may be fixed to them.
Lightweight board for ceilings or internal walls made of compressed wood pulp, now superseded by plasterboard.
A small strip of cement / lime mortar, timber, plastic etc used to cover or seal the junction between two surfaces.
A small ‘spire’ type ornament, often of terracotta or iron, fixed to the roof ridge at a gable end.
Large paving stones used on floors in older houses.
A thin strip usually of lead or zinc used to cover roof joints to prevent leakage (eg to chimney stacks).
Smooth contoured cement mortar around the base of chimney pots.
Flues are the ‘exhaust ducts’ for gasses from fires or appliances. Flue linings are long tubes fitted within flues, usually of stainless steel, clay pipework or concrete.
The triangular upper part of a wall under the verges at the edge a pitched roof (‘gable end’).
An opening into a drain, receiving water from downpipes or waste pipes.
The end of a brick, visible in solid walls when laid crossways (see ‘stretchers’).
The external junction where two roof slopes meet.
HOPPER or HOPPERHEAD
An open-topped box or funnel at the top of a downpipe that collects rainwater or waste water from one or more pipes.
A ‘manhole’ with a removable cover providing access to the drainage channel at its base.
Vertical side part of a door frame or window.
Horizontal structural beams used to construct ceilings, timber floors and flat roofs.
The overlap of courses of slates or tiles.
Thin strips of wood traditionally used as a backing to plaster
LEDGED & BRACED DOOR
A ‘ledged door ‘ is made from vertical timber boards fixed to thick horizontal cross-timbers called ledges. Some are strengthened with diagonal braces.
Horizontal structural beam over a window or door opening. Normally made of timber, concrete, stone or steel.
Glass or timber slats laid at an angle or hinged so that they can be opened to allow ventilation.
A roof constructed so each slope has two different pitches – a shallow upper part and a steeper lower part – so as to provide a top floor of usable space within a roof structure.
A generic term for any sealant used in the building process, eg for sealing joints around window openings.
An intermediary floor, eg between the ground and first floor.
A slot cut in a section of wood for a corresponding ‘tenon’ of another section to fit into.
An upright division of a window such as a vertical bar dividing individual lights.
A stout post at the bottom or top of a stair to which the handrail is fixed.
The projecting ‘lug’ on the back of a tile that hooks over the supporting batten
NOGGIN or NOGGING
A short timber batten that fits between a pair of joists or timber studs to add strength.
The rounded projecting edge of a stair step.
A window projecting from an upper floor.
A stone or robust block laid under the end of a beam or steel joist, to help distribute the load.
Large curved roofing tiles which hook over adjoining tiles.
Low wall along the edge of a flat roof or balcony.
Small strips of wood usually laid on a solid floor to form a pattern.
A vertical column, usually built in brickwork, used to strengthen a wall or support a weight.
The wall which separates, but is shared by adjoining properties.
The angle or slope of a roof, technically the ratio of span to height.
Large thin sheets made of plaster sandwiched between coarse paper, used for ceilings and internal walls.
The projecting base of a wall, usually of brick or render.
The smooth outer edge of mortar joints between bricks, stone etc
Horizontal beams in a roof upon which the rafters rest.
Plain single colour ‘geometric’ floor tiles made from clay, often red or brown, usually unglazed. (from the French word carre’ meaning square)
Projecting bricks or stone blocks traditionally used at corners of walls.
The main sloping roof timbers to which the tiles/slates, battens and felt are fixed.
The horizontal framing members of a door or window, usually at the top or bottom (see also ’stiles’).
A recess, groove or rectangular step cut in the edge of a piece of timber or stone etc (rebated’ or set-back) to receive a mating piece.
RENDER or RENDERING
General term for the finish applied to external wall surfaces of sand and cement /lime (or the first coat to plastering internally). It may be smooth, or finished in rough cast , pebbledashed etc.
Usually a garden wall built to hold back or retain a large bank of soil, rubble etc.
The vertical sides of an opening cut in a wall (typically of brick or stone) eg between a door or window frame and the front of the wall (see also ‘jambs’).
The top or ‘apex’ of the roof where two slopes meet, formed from a timber board joining the tops of the rafters and covered with shaped ‘ridge tiles’.
The vertical portion between treads of stairs
Moisture soaking up a wall from the ground, by capillary action, or through a floor ( see ‘Damp Proof Course’)
Removable covers at bends in drainage pipes, gullies etc allowing access for clearing blockages.
The outward thrust of a poorly restrained roof causing a wall to bow out. (see ‘collar’).
ROOM SEALED APPLIANCE
One that takes its combustion air from outside via a ‘balanced flue’ and also expels exhaust fumes via the same flue. Most modern boilers are room sealed.
A rough render finish to external walls, usually incorporating gravel.
Rolled Steel Joist, used for structural support ( eg to walls or floors) usually spanning relatively wide openings.
A layer of bituminous felt used for covering roofs before laying battens as a secondary defence against rain, but was not normally fitted in pre-war houses.
A smooth finish coat on a solid concrete floor slab, usually of mortar, concrete or asphalt.
A special weaved material for re-inforcing the filler concealing joints between plasterboard panels.
Private drainage system comprising underground tanks where sewage decomposes through bacteriological action, but can require periodic emptying.
General disturbance in a structure showing as distortion in walls etc. Usually the result of initial compacting of the ground due to the loading of the building.
SILL or CILL
The lower horizontal member at the bottom of a door or window frame. Externally it should throw water clear of the wall below (of stone, concrete, brick, or timber). Internally it is a shelf at the bottom of a window.
A window in a roof slope or ceiling to admit daylight
A dwarf wall supporting the joists under a suspended timber ground floor.
A rubble-filled pit for rainwater dispersal
Strips of metal (usually lead, zinc or copper) fitted beneath tiles to provide a water-proof joint at the junction of a roof with a wall or a chimney. Normally overlain with flashings.
The underside (‘external ceiling’) below eaves, balconies etc
Crumbling masonry as a result of weather damage
The vertical framing members of a door or window (see also ‘rail’).
The side of a brick, visible in walls when laid lenghways (see ‘header’)
A course of brickwork that projects beyond the face of an external wall (or band course).
A hard external plaster used to imitate stone, superseded by modern cement render.
Lightweight internal wall, usually of a timber framework faced with plasterboard or lath & plaster, usually non-loadbearing
Ground movement, often as a result of clay shrinkage, drainage problems or mining activities.
Soil lying immediately below the top soil, upon which foundations usually bear.
Soil and vent pipe. Vertical stack taking ‘soil’ waste from WC’s & bathrooms etc, typically of plastic or iron, and vented at the top, normally terminating at roof level.
Large metal bar passing through a wall to brace a structure suffering from structural instability.
A timber fillet fixed under the roof coverings above the eaves, in order to raise the edge of the first row of slates.
Small metal strips used to hold slipped slates in position.
TONGUE & GROOVE BOARDING
Close fitted boards where the edge of one board fits into a groove of the adjoining board.
Mortar traditionally applied on the underside of slates or tiles to help prevent moisture penetrating.
Horizontal bar of wood or stone across a window or top of door.
The horizontal ‘flat’ part of a step or stair.
A small section of timber joist run at right angles to the ends of the main floor joists to form an opening, eg for stairs or a fireplace.
Thermosatic radiator valve. An adjustable sensor valve next to a radiator allowing its temperature to be set.
A method of strengthening weak foundations where a new stronger foundation is placed beneath the original.
Gutter at the junction of two roof slopes – at the bottom of a ‘V’.
The edge of a roof , especially over a gable.
Wood panelling or boarding on the lower part of an internal wall.
A timber beam placed on a wall, eg at eaves level for the roof rafters, or to receive floor joists.
Strips of metal built across cavity walls to join the inner and outer skins.
WEATHERBOARD / WEATHER BAR
A board fixed to the bottom of a door on the outside to prevent rain driving underneath. A weather bar is a strip of metal fixed to a door sill to prevent water flowing under the door.
General term of beetle infestation – ‘beetle infestation’.